Computerized EMI.

"The most advanced all monitoring system in the industry".


​ "The New Tech Systems’ TRUE-WALL™ solid state continuous wall monitoring system monitors 100% of the wall surface AND not “localized wall loss only” as on other systems. The TRUE-WALL™ system allows the inspection company to detect wall anomalies in both Dynamic AND Static modes. In other words, it allows the operator to detect wall loss while the pipe is moving through the inspection head AND position the suspected wall loss area inside the head and “park” on the exact location of the wall loss and display it in real-time on the computer screen. The proveup process is much faster since the TRUE-WALL™ System identifies the exact area of wall loss for the operator. 


Liquid Penetrant Inspection.

Liquid Penetrant Inspection.

Liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although, for ferrous components, magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service components.


Penetrant may be applied to the test component by dipping, spraying, or brushing. After adequate penetration time has been allowed, the excess penetrant is removed and a developer is applied. The developer helps to draw penetrant out of the flaw so that an invisible indication becomes visible to the inspector. Inspection is performed under ultraviolet or white light, depending on the type of dye used - fluorescent or nonfluorescent (visible).

Wet/Dry Magnetic Particle

Wet/Dry Magnetic Particle Inspection.​


​This is a process for detecting surface and slightly subsurface discontinuities in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys and is performed by our professional inspectors to worldwide standards such as EN473 and ISO9712.


The presence of a surface or subsurface discontinuity in the material allows the magnetic flux to leak, since air cannot support as much magnetic field per unit volume as metals. Ferrous iron particles are then applied to the part. The particles may be dry or in a wet suspension. If an area of flux leakage is present, the particles will be attracted to this area. The particles will build up at the area of leakage and form what is known as an indication. The indication can then be evaluated to determine what it is, what may have caused it, and what action should be taken, if any.

And Many Other Services.


  • Wet/Dry Magnetic Particle Inspection

  • Liquid Penetrant Inspection

  • Ultrasonic Inspection

  • EMI Inspection of Drill Pipe and Tubing

  • BHA Inspection

  • Hevi Wate inspection

  • Directional Tool Inspection

  • Mud Motor Inspection

  • Thru Tubing Tool/Motor Inspection

  • Rig Floor Inspections

  • 3rd Party Compliant Inspections

  • Casing Inspection

  • Rig Component Inspection

  • Pipe, Tubing, and Tool Storage Capability

  • ID/OD Cleaning Service of Tubing